![]() ![]() ![]() (Optional) Integer in the range from 1 to 99 that specifies a standard access list of IP addresses. (Optional) String (not to exceed 64 characters) that specifies the privacy user password. (Optional) Specifies the use of a 256-bit AES algorithm for encryption. (Optional) Specifies the use of a 192-bit AES algorithm for encryption. ![]() (Optional) Specifies the use of a 128-bit AES algorithm for encryption. (Optional) Specifies the use of the Advanced Encryption Standard (AES) algorithm for encryption. (Optional) Specifies the use of the 168-bit 3DES algorithm for encryption. (Optional) Specifies the use of the 56-bit Digital Encryption Standard (DES) algorithm for encryption. (Optional) Specifies the use of the User-based Security Model (USM) for SNMP version 3 for SNMP message level security. If both are specified, the IPv6 named access list must appear first in the statement. IPv4, IPv6, or both IPv4 and IPv6 access lists may be specified. (Optional) Specifies an IPv6 named access list to be associated with this SNMP user. (Optional) Specifies an Access Control List (ACL) to be associated with this SNMP user. (Optional) String (not to exceed 64 characters) that enables the agent to receive packets from the host. (Optional) Specifies the HMAC-SHA-96 authentication level. (Optional) Specifies the HMAC-MD5-96 authentication level. (Optional) Specifies which authentication level should be used. (Optional) Specifies whether the password appears in encrypted format. Allows the use of the encrypted keyword or auth keyword or both. Specifies that the SNMPv3 security model should be used. (Optional) Name of the Virtual Private Network (VPN) routing and forwarding (VRF) table to use for storing data. (Optional) Specifies an instance of a routing table. (Optional) Integer value that identifies the UDP port. (Optional) Specifies the User Datagram Protocol (UDP) port number of the remote host. (Optional) Name or IP address of the remote SNMP host. If both an IPv6 address and IPv4 IP address are being specified, the IPv6 host must be listed first. (Optional) Specifies a remote SNMP entity to which the user belongs, and the hostname or IPv6 address or IPv4 IP address of that entity. Name of the group to which the user belongs. Name of the user on the host that connects to the agent. Snmp-server user username group-name ] ] Syntax Description To remove a user from an SNMP group, use the no form of this command. To configure a new user to a Simple Network Management Protocol (SNMP) group, use the snmp-server user command in global configuration mode. trusted-port (IPv6 ND Inspection Policy). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |